AB

Lammina 14 AL

This light-weight, hard-bottomed open tender is perfect for boats with lighter capacity davits. Featuring a tough aluminum hull for weight reduction and durability, this solidly constructed hull provides years of reliable use.

The Lammina AL easily cuts through wakes and chop with a lower horsepower than fiberglass tenders. A full-length rubber keel protector enables you to cruise through unknown areas without worry, and its double layer floor guarantee a dry deck and a stable ride. The bow locker serves as a convenient boarding step and comfortable seat for guests. You can also use it to store a portable fuel tank where the fuel line passes underneath the floor, leaving the deck free of obstructions. As an important key feature, the models from 8 to 10ft come with an 820 CSM Orca® Coated Fabric, it offers the thickest and strongest fabric in their segment which brings extra protection. The versatile full-sized Lammina AL has a modular design with customizable seating and console choices.

Our chrome-free Pretreatment and Powder Coating Technology offers a superior coating adherence. The Lammina AL line also can be requested uncoated. These include lifting and towing eyes vertically positioned to avoid these from bending and reinforced transom knees.

  • Overall length
  • 14' / 4.27m
  • Overall Beam
  • 6' 7 " / 2.00m
  • Inside Length
  • 10' 10" / 3.30m
  • Inside Beam
  • 3'3'' / 0.99m
  • Tube Diameter
  • 19" / 0.48m
  • Number of Chambers
  • 4
  • Person Capacity
  • 8
  • Weight
  • 246lb / 112kg
  • Weight with Bow Locker
  • 274lb / 124kg
  • Recommended HP
  • 40 hp / 29.8 kw
  • Maximum HP
  • 50 hp / 37.3 kw
  • Shaft length
  • 20" / 50.8 cm
  • RDC Design Category
  • C
  • Aluminum Hull Thickness
  • 0.125 in / 3.18 mm
  • Aluminum Transom Thickness
  • 0.190 in / 4.78mm
  • Deep “V” Marine Grade Aluminum Hull
  • Heavy Duty Transom Knee
  • Stringer System Welded Under Aluminum Deck
  • Non-Skid Rubber Floor Panels
  • Plastic External Transom Plate
  • Aluminum Internal Transom Plate
  • Aluminum Bow Eye
  • 3-4 Aluminum Davit Lifting Points
  • Aluminum Transom Tie Down & Towing Rings
  • Aluminum Bow Tie Down & Towing Rings
  • Deck Drain with Plug
  • Orca (CSM) Five Layer Coated Fabric
  • Raised Double Rub Rail
  • Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
  • 1 Front & 4 Side Orca (CSM) Fabric Handles on Tubes
  • 2 Inside Bow Sets of Triple Orca (CSM) Fabric Handles on Tubes
  • 2 Inside Stern Double Orca (CSM) Fabric Handles on Tubes
  • Paddles with Aluminum Shaft
  • Paddle Holders
  • Hand Pump
  • Maintenance Kit
  • Owner's Manual
  • 3 Layers Reinforced Seams
  • Rubber Protector on Full Length of Keel
  • Bow Locker/Seat with Vent & Storage to Fit a 6 Gal Portable Fuel Tank
  • Portable 6 gal Fuel Tank Installed in Bow Locker with Fittings
  • Tube Chaps
  • Boat Cover
  • Chock Set
  • Bow Step with Fold Down Stainless Steel Cleat
  • Lateral Fold Down Stainless Steel Cleat
  • Fiberglass Console
  • Fiberglass Console with Forward Seat
  • Bench Seat with Storage
  • One Person Jockey Seat
  • Two Person Jockey Seat
  • Stainless Steel Helm Unit
Ready to get out on the water? Contact Us